Sunday, February 15, 2009

FREE MODEL GLIDER PLAN! Tiny glider, 8 inch Catapult Launched Glider (CLG)

If you downloaded this plan before 28 February 2009, please discard that copy and use this version instead - some important details were either wrong or missing Sorry!

As you can see from earlier blog posts, I've been playing with Charlie Sotich's simple 8" CLG. Necessity really, after the original 1/32 thin wings - as per his plan - shredded on launch.


So here is my "re-mix" of his design. Main changes are conventional HLG style wing, three panel instead of V-dihedral, a slightly longer nose and some mods for a stronger wing fuselage joint.

Sotich named many of his designs [SOMETHING] DIP. For example, his famous 48" glider was called LIL DIP. Since this 8 incher is intended for the Tiny Gliders postal event, I called it the TINY DIP, but I don't know whether he ever made a design with that name.

I hope you enjoy the plan - drawn with a smile on my face and a bit of tongue in cheek. An easy build, lots of fun, pretty in the air and satisfying performance (right click on the plan and select Save Image As). Try a 3/16" rubber loop for the catty. You can use kevlar tow instead of CF. Fix to the model's balsa sides with CA glue. Note the washout on both tips and the washin triangular wedge on the left wing only. There is a slight incidence (decalage) in the design. I visualise it as the bottom of the fuselage being horizontal, and the top line of the fuselage a slope, taller at the front. The closer you get to 0-0, the straighter and higher the launch, but stability decreases. Too much decalage, then the climb becomes a height-sapping spiral (or worse, gets loopy).

Photo below of the TINY DIP glider (4.1g ready to fly).




Sunday, February 8, 2009

Source of Vintage (Old Timer) Plans and Articles


There's an excellent new source of information on "vintage" model gliders and free flight aircraft. The POPULAR SCIENCE magazine series has been digitized and is now available on the internet via Google Book Search.


Screen shot of an article by Frank Zaic on the THERMAL HUNTER rubber model is shown left. It also includes building instructions, tips and drawings.



I had a look through some issues for articles and this is just a selection of the gems that I found:
  1. New Thermal Hunter Plane Model, Frank Zaic, August 1936, p60
  2. International Contest Flyer, Frank Zaic, June 1940, p150
  3. Model Fuselage Building, Edwin T Hamilton, July 1931, p110
  4. Give your model the right propeller, Edwin T Hamilton, July 1930 p96
  5. From ten parts you can build twenty model planes, Edwin T Hamilton, August 1931, p72
  6. Model-Airplane Short Cuts, Frank Zaic, September 1941, p170
  7. Test Flying Model Airplanes, Frank Zaic, June 1942, p196
  8. Gas Models and Towline Gliders, Frank Zaic, September 1942, p.HW230
  9. Novel Inventions aid Model-Plane Champions [no author indicated] November 1939, p67
  10. The modern 300 incher, Zaic, Aug 1942, p.HW174
  11. Hints that will help you build airplane models, Edwin T Hamilton, January 1931, p116
  12. Miss Science (gas model), Frank Zaic, September 1939, p142
Happy reading!

Thursday, February 5, 2009

Tiny Gliders Postal 2009



Alexandre Cruz has created a fabulous blog for the Tiny Gliders postal event this year. Please do enjoy building some 6" and 8" gliders and fly in it. It's a lot of fun and easy to join in! It would make a great club event too, or activity for the kids. There's no excuse....

Left, a photo of my 6" DOGEAR hlg.

Thanks Alexandre!


Tuesday, January 27, 2009

P-51D Mustang - Completed model


Here she is, complete with pilot. One thing I learn from this is to never, I repeat, NEVER, use domestic tissue again. Japanese is so much better. This stuff shrinks in weird ways, is not easy to apply and the finish is lousy.


I love the lines of that wacky Dick Baxter prop - which is pretty much as per plan. I used a yoghurt pot rather than a coffee cup.







Weight without rubber was 8.8g. Prop on its own weighed 1.8g. Here is a photo of two prop centre shafts. The top is a ramp type of freewheel clutch, the bottom has a Garami-style latch. They're both smooth, but the ramp is more compact so I used it because of the spinner. Spinner was made out of tissue pva'd to paper. Cut out a semi-circle and made a cone out of that.




Power is one 1/8" loop. So far, I've only given her ~150 turns. Stab adjustment was required, but no ballast at all (thus far). All indications are that she's a good flyer! Need a good day to try her out properly.


A very enjoyable build.

Saturday, January 10, 2009

Free Flight Postals

Postal events allow competition without the formality of a meet. Each modeller sends in scores by a certain deadline, usually a series of times. Many are run on an honour basis - and I certainly don't know anyone who'd cheat by sending in false times - what's the point? In any case, weather conditions are not the same for everyone. So in my view, postals should not be thought of as "real" competitions.

Click here for a super list of some free flight postals. I was sad to see that the 2008 Tiny Gliders Postal had few entries because it is one of my favourites. The plus side is that Alexandre Cruz did a great job of keeping it going and there is good reason to anticipate that it will be bigger and better in 2009! If I find out the new website for it, I'll post it here.

Finally, how on earth did this patent get granted by the US Patent Office in 1975? There's no way it was novel or inventive at that time!

Tuesday, December 30, 2008

Catapult launched glider: Sotich 8" CLG

This is a catapult glider design by Charlie Sotich. It's a quick n easy build and flies reasonably well. The plan is available from the Aeromaniacs site here (click on the pdf symbol next to Catapult!).

This one took me just over half an hour to make and came in at 2.7g including nose weight. Not bad for an 8" span model. She flew right off the board with an in built left turn. First flight was a promising 36s in cold weather, 8mph wind.







Alas, after about a dozen flights, I pulled the elastic back too enthusastically and shredded the right wing - the curse of small CLGs! I'm oddly pleased because it was the wood that failed, not the glue joint.

Great fun while she lasted.

All was not lost, as I decided re-utilise the fuselage for another, different, wing and see what I could learn from that






So here she is the next day with a conventional 3 panel wing made out of 1/8 balsa. Also now sporting carbon fibre tow on the sides to keep the fuselage stiff. Weight has gone up to 4.2g, but she still flies well. Polyhedral is 1 3/8" under each tip. Too much, because she Dutch wobbles in flight, but at least showed no tendency to spiral in.







Here's a photo of the underside. You can see the Al-foil tape that I've used to reinforce the wing-fuselage joint. So far, no more shredding!


I think the original is prettier. The modified version seems more consistent. Best flight today was just under 45 s in winter conditions, with no flights under 30 s.

Tuesday, December 23, 2008

Rapier Rocket Car / Test Rig

Just got my sticky mitts on some Rapier rockets. I've always wanted to make a rocket-powered glider. Another project for next year...

I've never used these rockets before, so I built a test rig for my son. OK, it's a car, but the spoiler counts as a wing!  Inserted a stick-like fuse into the hole at the rear, lit it and then watched it fizzle out. Left it for a while, then tried again. Eventually, it ignited and whizzed off leaving a satisfying trail of smoke. I must get an electric igniter. It has a hot tip: insert in the hole to start the rocket. 
Google