Mad Scorpio RC glider and Things to do

This is megatastic, a Scorpio rocket glider with RC! :)

I've got many projects that are sitting around to be completed. So much to do, so little time. Work, family and other aspects of life always seem to take higher priority. Here's a potted list:

• Scorpio 19.25" FF Rapier rocket powered glider, a superb design by Steve Bage. Lovely kit from Shorty's Basement to build. Cool video here.

• Pearl 1.49m R/E radio control discus launched glider. ARF from South Coast Sailplanes, but kitting it out with radio gear will take some concerted effort and time.

• Sovereign, 2m RC glider. Full kit to build from Mountain Models The photo below shows a fabulous example by hangerdude from the RC Groups forum. Isn't that a mouth-watering picture?

• Dingbat vintage HLG from plans, which I've been meaning to build for years.

• AND Lots of flying to do - CLGs, HLGs, DLGs, rubber, RC electric, RC gliders...
  

Wee Bo Weevil: 12" Catapult Launched Glider CLG

The original Texas Bo' Weevil hand launched glider HLG by Don Chancey was published in American Aircraft Modeler in 1972. It was a 17" span all wood design of traditional layout and very steady, reliable performance.

I thought it would be fun to miniaturise, modernise and catapultise it!

So, here's a 12" span scaled down version, with carbon fibre boom and pop-up wing DT operated by a button timer. Natty rainbow colours anyone?











Side view showing the wing down. To give you a sense of scale, the button timer on the nose is 15mm diameter.

I call it the Wee Bo Weevil.








Another view of the DT system, with wing in the up position.

All up weight including nose ballast is 13.5g. It launches and flys pleasingly well, but is not as super-performing as a "clean" and modern 12" design, a la the experts such as Lee Hines, Tony Matthews, et al.

Fun though, and it's great to watch dog walkers in the park looking puzzled as it DTs down.

FREE MODEL GLIDER PLAN! Tiny glider, 8 inch Catapult Launched Glider (CLG)

If you downloaded this plan before 28 February 2009, please discard that copy and use this version instead - some important details were either wrong or missing Sorry!

As you can see from earlier blog posts, I've been playing with Charlie Sotich's simple 8" CLG. Necessity really, after the original 1/32 thin wings - as per his plan - shredded on launch.

So here is my "re-mix" of his design. Main changes are conventional HLG style wing, three panel instead of V-dihedral, a slightly longer nose and some mods for a stronger wing fuselage joint.

Sotich named many of his designs [SOMETHING] DIP. For example, his famous 48" glider was called LIL DIP. Since this 8 incher is intended for the Tiny Gliders postal event, I called it the TINY DIP, but I don't know whether he ever made a design with that name.

I hope you enjoy the plan - drawn with a smile on my face and a bit of tongue in cheek. An easy build, lots of fun, pretty in the air and satisfying performance (right click on the plan and select Save Image As). Try a 3/16" rubber loop for the catty. You can use kevlar tow instead of CF. Fix to the model's balsa sides with CA glue. Note the washout on both tips and the washin triangular wedge on the left wing only. There is a slight incidence (decalage) in the design. I visualise it as the bottom of the fuselage being horizontal, and the top line of the fuselage a slope, taller at the front. The closer you get to 0-0, the straighter and higher the launch, but stability decreases. Too much decalage, then the climb becomes a height-sapping spiral (or worse, gets loopy).

Photo below of the TINY DIP glider (4.1g ready to fly).

Source of Vintage (Old Timer) Plans and Articles

There's an excellent new source of information on "vintage" model gliders and free flight aircraft. The POPULAR SCIENCE magazine series has been digitized and is now available on the internet via Google Book Search.


Screen shot of an article by Frank Zaic on the THERMAL HUNTER rubber model is shown left. It also includes building instructions, tips and drawings.

I had a look through some issues for articles and this is just a selection of the gems that I found:

1. New Thermal Hunter Plane Model, Frank Zaic, August 1936, p60
2. International Contest Flyer, Frank Zaic, June 1940, p150
3. Model Fuselage Building, Edwin T Hamilton, July 1931, p110
4. Give your model the right propeller, Edwin T Hamilton, July 1930 p96
5. From ten parts you can build twenty model planes, Edwin T Hamilton, August 1931, p72
6. Model-Airplane Short Cuts, Frank Zaic, September 1941, p170
7. Test Flying Model Airplanes, Frank Zaic, June 1942, p196
8. Gas Models and Towline Gliders, Frank Zaic, September 1942, p.HW230
9. Novel Inventions aid Model-Plane Champions [no author indicated] November 1939, p67
10. The modern 300 incher, Zaic, Aug 1942, p.HW174
11. Hints that will help you build airplane models, Edwin T Hamilton, January 1931, p116
12. Miss Science (gas model), Frank Zaic, September 1939, p142
    

Happy reading!

Tiny Gliders Postal 2009

Alexandre Cruz has created a fabulous blog for the Tiny Gliders postal event this year. Please do enjoy building some 6" and 8" gliders and fly in it. It's a lot of fun and easy to join in! It would make a great club event too, or activity for the kids. There's no excuse....

Left, a photo of my 6" DOGEAR hlg.

Thanks Alexandre!

P-51D Mustang - Completed model

Here she is, complete with pilot. One thing I learn from this is to never, I repeat, NEVER, use domestic tissue again. Japanese is so much better. This stuff shrinks in weird ways, is not easy to apply and the finish is lousy.


I love the lines of that wacky Dick Baxter prop - which is pretty much as per plan. I used a yoghurt pot rather than a coffee cup.







Weight without rubber was 8.8g. Prop on its own weighed 1.8g. Here is a photo of two prop centre shafts. The top is a ramp type of freewheel clutch, the bottom has a Garami-style latch. They're both smooth, but the ramp is more compact so I used it because of the spinner. Spinner was made out of tissue pva'd to paper. Cut out a semi-circle and made a cone out of that.




Power is one 1/8" loop. So far, I've only given her ~150 turns. Stab adjustment was required, but no ballast at all (thus far). All indications are that she's a good flyer! Need a good day to try her out properly.


A very enjoyable build.

Free Flight Postals

Postal events allow competition without the formality of a meet. Each modeller sends in scores by a certain deadline, usually a series of times. Many are run on an honour basis - and I certainly don't know anyone who'd cheat by sending in false times - what's the point? In any case, weather conditions are not the same for everyone. So in my view, postals should not be thought of as "real" competitions.

Click here for a super list of some free flight postals. I was sad to see that the 2008 Tiny Gliders Postal had few entries because it is one of my favourites. The plus side is that Alexandre Cruz did a great job of keeping it going and there is good reason to anticipate that it will be bigger and better in 2009! If I find out the new website for it, I'll post it here.

Finally, how on earth did this patent get granted by the US Patent Office in 1975? There's no way it was novel or inventive at that time!