Catapult launched glider: Sotich 8" CLG

This is a catapult glider design by Charlie Sotich. It's a quick n easy build and flies reasonably well. The plan is available from the Aeromaniacs site here (click on the pdf symbol next to Catapult!).

This one took me just over half an hour to make and came in at 2.7g including nose weight. Not bad for an 8" span model. She flew right off the board with an in built left turn. First flight was a promising 36s in cold weather, 8mph wind.

Alas, after about a dozen flights, I pulled the elastic back too enthusastically and shredded the right wing - the curse of small CLGs! I'm oddly pleased because it was the wood that failed, not the glue joint.

Great fun while she lasted.

All was not lost, as I decided re-utilise the fuselage for another, different, wing and see what I could learn from that






So here she is the next day with a conventional 3 panel wing made out of 1/8 balsa. Also now sporting carbon fibre tow on the sides to keep the fuselage stiff. Weight has gone up to 4.2g, but she still flies well. Polyhedral is 1 3/8" under each tip. Too much, because she Dutch wobbles in flight, but at least showed no tendency to spiral in.







Here's a photo of the underside. You can see the Al-foil tape that I've used to reinforce the wing-fuselage joint. So far, no more shredding!

I think the original is prettier. The modified version seems more consistent. Best flight today was just under 45 s in winter conditions, with no flights under 30 s.

Rapier Rocket Car / Test Rig

Just got my sticky mitts on some Rapier rockets. I've always wanted to make a rocket-powered glider. Another project for next year...

I've never used these rockets before, so I built a test rig for my son. OK, it's a car, but the spoiler counts as a wing!  Inserted a stick-like fuse into the hole at the rear, lit it and then watched it fizzle out. Left it for a while, then tried again. Eventually, it ignited and whizzed off leaving a satisfying trail of smoke. I must get an electric igniter. It has a hot tip: insert in the hole to start the rocket. 

Model Glider Plans

If you're looking for really interesting A/2 glider plans, then the January 2007 issue of New Clarion is a great resource. It contains fabulous information on a number of, shall we say, "nostalgic" glider designs. A/2 gliders are basically the big ones - usually between 60 and 79 inch span (~ 2m). SAM 1066 is a UK based chapter of the Society of Antique Modellers - well worth a visit and their membership is free!

Converting a free flight glider to radio control RC

Free Flight gliders could be useful starting points for an RC conversion - to make a really high performance radio control glider. To flesh this out, here's an example of enlarging a Keil Kraft Soarer and converting it to RC (discussed on the RC Groups forum) :


And here's a super example of an RC conversion of the Lulu (50" free flight glider, discussed on the SFA forum, by my friend Eagleone):


I would suggest that neither the Soarer nor the Lulu is in the same league as the big A/2 gliders. Indeed, I daresay that converting one of those "biggy" free flight A/2 designs to RC would create a very high performance radio control sailplane.

If only I had the time to try it....